Dextra Mechanical Rebar Splicing System – Mokasco Express

Dextra Mechanical Rebar Splicing System

1. Bartec® Bartec®system is the best “pound for pound” mechanical splice on the market, with a guaranteed “bar-break” performance under full tensile load. Bartec®offers the easiest way of connecting two bars that cannot be rotated thanks to its parallel thread that uses the same coupler for standard splices and position splices with a simple adjustment in the threading length on the reinforcing bar.
2. Griptec® Griptec® system is the most accomplished mechanical splice on the market : its patented extrusion process includes a systematic, non-destructive tensile test that performs a 100 check on the bar end preparation. Moreover, the extrusion machine automatically adjusts its processing parameters when switching from one bar size to another, thereby greatly improving the productivity and reducing the risk of human error.
3. Rolltec® Rolltec® system is a type 2 rolled-thread splice requiring only one single machine and one operator for the bar-end preparation process. Rolltec® offers the benefit of easily connecting two bars that cannot be rotated , by adjusting the threading length on the reinforcing bar and using the same coupler for standard splices and position splices.
4. Unitec® Unitec® system is a universal on-site splicing system, that does not need any hydraulic power tool. A standard compressed air supply is sufficient to tighten the bolts and achieve the connection. It is ideal in situations where there is no bar end preparation facility to thread the bars and where it would be too cumbersome to handle a mobile hydraulic press.
5. Repair grip™ Repair grip™ system is an on-site splicing method using a sleeve that is swaged onto the ribs of the reinforcing bar by means of a mobile hydraulic press. It is ideal in situations where there is no bar end preparation facility to thread the bars.
6. End Anchors End anchors are anchor plates that are fixed at the end of reinforcing bars by the same means as used for the mechanical splices. They constitute a mechanical anchorage that is a convenient alternative to hooks in congested areas. They also save steel and, by avoiding the bending, they remove the risk of rebar embrittlement, especially on large diameters. They are available within Bartec®, Griptec® and Rolltec® splice range.

.